 |
|
||||||
|
|
LIMPRES PLATE V-20/77 and V-44/200LIMPRES PLATES are corrugated sheet metal plates for roof covering. With its harmonious design can be used both –in industrial purpose and for residential buildings. |
 |
|||||
Limpres lamperija
There are 2 basic types: LIMPRES PLATE V-20/77 and V-44/200,
where first number means the height of wave (20 mm and 44 mm),
and second number means distance between 2 waves, or a step (77
mm and 200 mm).
Advantages:
- simple and fast installation
- resistance to breaks and hits
- approximately 10 times less weight than classic brick tile
- it does not require massive construction
- wavy profile smother the rain noise
- it is wind-proof
Color
LIMPRES PLATE V-20/77 is suitable, besides for
roofing, for wall covers as well. Distance between supporters should
be cca.100 cm, depending on roof angle.
Standard dimensions: width 110 cm, length as requested.
Transparent acryl plates are compatibile with this plate. It is
resistant to hits, UV rays and other weather conditions.
Manual instruction
LIMPRES PLATE V-20/77
Static loadin table
LIMPRES PLATE V-20/77
LIMPRES PLATE V-44/200 is ideal for industrial
roofing and farms because it can stand big distances of secondary
supporters, up to cca.200 cm on metal construction, depending
on roof angle.
Standard dimensions: width 110 cm, length by request.
.
.
.
.
Manual instruction
LIMPRES PLATE V-44/200
Static loading table
LIMPRES PLATE V-44/200
From additional equipment for LIMPRES PLATES we can offer you:
LIMPRES ROOF TOP which is adjustable to every roof angle, cut
on waves, with air ventilation, and has possibility of slide moving
of left side to the right.